Home Page Telair

BRIDGE FAQ

BRIDGE
FAQ

F1
 
Must the customer who mounts the Bridge have an energy source in order to charge the batteries back up ?
Yes
F2
 
Is it possible use in parallel connection different lead batteries (A-battery, gel, Pb-Ca) ?
Yes, if there is an energy source (such as the Self-Energy EG20) to charge the batteries.
F3
 
The vehicle’s headlights have been inadvertently left on and the engine does not start. What is to be done?
It is possible to use the leisure battery charge:
A1) switch off all appliances ( also headlights, lights etc).
A2) set the Bridge to manual mode if you have a Self-Energy EG20, push the manual start switch
After 10 minutes, try to start the vehicle.
F4
 
What kind of warnings would the Bridge activate in case the engine battery is faulty?
The Bridge indicates a possible failure when:
- switch off all appliances, the red led related to the engine battery lights (flashing or On) few minutes after the turning off of the engine.
In such cases, switch OFF the Bridge and go to the nearest workshop that will effect a careful check.
F5
 
Can only those who have a Self-Energy EG20 install and use the Bridge?
No.
The Bridge used jointly with a Self-Energy EG20 is the ideal solution, but it is possible to use other energy sources (solar panels, battery chargers, mains hook-up, etc…).